LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1999 >> E430 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes -- Testing & Repair -- 210 Chassis >> Testing & Repair >> Risk of poisoning Risk of injury - AR42.10-P-0010-02A

Risk of poisoning Risk of injury - AR42.10-P-0010-02A

Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. 

TORQUE SPECIFICATION Fixed caliper at rear

Number Designation Model 129.05/06 0/061/063/064/066/067 Model 129.068/076 Model 140
BA42.10-P-1002-01A Bleed screw on rear axle fixed caliper Nm 7 7 7
TORQUE SPECIFICATION Fixed caliper at rear

Number Designation Model 170.435/444/445/447/449/465 Model 170.466 Model 202.01/020/022/023/024/ 025/026/029/ 078/08/12/13/ 18/19, 202.028 without ASR
BA42.10-P-1002-01A Bleed screw on rear axle fixed caliper Nm 7 7 7
TORQUE SPECIFICATION Fixed caliper at rear

Number Designation Model 202.028 with ASR, 202.033/093 Model 208.335/ 344/345/347/ 348/365/370/ 374/435/444/ 445/447/448/ 465/470
BA42.10-P-1002-01A Bleed screw on rear axle fixed caliper Nm 7 7
TORQUE SPECIFICATION Fixed caliper at rear

Number Designation Model 210.00/01/02/03/04/05/06/ 070/072/074/08 Model 210.20/21/ 22/23/24/26/270/272/28/60/61/663 Model 210.274
BA42.10-P-1002-01A Bleed screw on rear axle fixed caliper Nm 7 7 7
TORQUE SPECIFICATION Front axle fixed brake caliper

Number Designation Model 129 Model 140 Model 202.028 with Code 957 (C 36 AMG)
BA42.10-P-1002-02A Bleed screw at front axle fixed brake caliper Nm 7 7 7
TORQUE SPECIFICATION Front axle fixed brake caliper

Number Designation Model 208.370/470 up to 18.01.99 except USA ONLY Model 210.055 with Code 957 (E 36 AMG) Model 210.072/270/272 up to 07.02.99, model 210.070 up to 07.02.99 except IMPORTANTJAPAN ONLYAUSTRALIA ONLY
BA42.10-P-1002-02A Bleed screw at front axle fixed brake caliper Nm 7 7 7
TORQUE SPECIFICATION Front axle floating caliper

Number Designation Model 170.435/444/445/447/449/465 Model 170.466
BA42.10-P-1002-03A Bleed screw on front axle floating caliper Nm 7 7
TORQUE SPECIFICATION Front axle floating caliper

Number Designation Model 202.018/020/ 022/023/078/ 080/081/083/ 087/120/121/ 122/125/133/ 134/180/182/ 193/194, 202.028 up to 08/95 Model 202.024/025/02 6/029/082/085/ 086/088/089/ 128/188, 202.028 as of 09/95
BA42.10-P-1002-03A Bleed screw on front axle floating caliper Nm 7 7
TORQUE SPECIFICATION Front axle floating caliper

Number Designation Model 202.033/093, 208.374, 210.072 with code 957 (E50 AMG), 210.074/274 Model 208.335/344/34 5/347/348/365/ 435/444/445/ 447/448/465, 208.370/470 USA ONLY
BA42.10-P-1002-03A Bleed screw on front axle floating caliper Nm 7 7
TORQUE SPECIFICATION Front axle floating caliper

Number Designation Model 208.370/470 from 19.01.99, except USA ONLY Model 210.00/01/ 02/035/037/04/ 05/06/08/20/21/ 22/23/24/26/28/ 60/61/663, except model 210.083/283 as of 08.02.00 Model 210.070 AUSTRALIA ONLYUSA ONLYJAPAN ONLY
BA42.10-P-1002-03A Bleed screw on front axle floating caliper Nm 7 7
TORQUE SPECIFICATION Front axle floating caliper

Number Designation Model 210.083/270/ 283 as of 08.02.99, model 210.070 as of 08.02.99 except AUSTRALIA ONLYUSA ONLYJAPAN ONLY
BA42.10-P-1002-03A Bleed screw on front axle floating caliper Nm 7
Fig 1: Identifying Socket Wrench (140 589 03 09 00)
G04635464Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Open bleed screw on brake caliper (1) and, with a pressure of bar applied to the system, continue until roughly 80 cm 3 of bubble-free brake fluid emerges.
  2. Close bleed screw on brake caliper (1).
  3. Model 140 only: Open bleed screw (b) on master brake cylinder, allow bubble-free brake fluid to emerge, then reclose.
  4. Repeat bleeding operation at brake calipers (2, 3, 4).

    IMPORTANT Allow fluid to flow at each brake caliper (2, 3, 4)

    until roughly 80 cm3 emerges free of bubbles.

    Fig 2: Identifying Bleeding Operation On Brake Caliper
    G04635465Courtesy of MERCEDES-BENZ OF NORTH AMERICA.