Location/task/design/function of ABS control module - GF42.30-P-4500A: Notes

MODEL 202 as of 1.9.95, 168, 170, 208 with CODE (470a) Anti-lock braking system (ABS) 

Fig 1: Identifying ABS Control Module - Model 168 And 170

Fig 2: Identifying ABS Control Module - Model 202 Without Control Module Box

Fig 3: Identifying ABS Control Module - Model 202 With Control Module Box

Fig 4: Identifying ABS Control Module

	Location	Model 168, 170, 208: Control module box. Model 202: Front passenger's footwell or control module box
	Task	Perform all brake control functions of ABS Supplies other systems direct or via CAN with the vehicle speed signal and wheel speed status signal Supplies the instrument cluster with signals for the ABS MIL (A1e17) and, additionally in the case of control module version LK55/1, with the signal for the brake pad wear indicator lamp (A1e6) and low brake fluid level/parking brake indicator lamp (A1e7) via a serial cable or CAN.
	Design of ABS control module		GF42.30-P-4500-02A
	Function of ABS control module		GF42.30-P-4500-01A
	Location/task/design/function of wheel speed sensor		GF42.45-P-4550A
	Location/task/function of stop lamp switch	Stop lamp switch, location/task/function - GF42.10-P-4000A	GF42.10-P-4000A