Removing and installing front rubber mounts of rear axle mounting - AR35.10-P-0040-02D

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1002-06A	Lubricant	A 000 989 01 60

Fig 1: Identifying Removal/Installation Tool (201 589 10 43 00)

Removing rubber mount

Press rubber mount out of rear axle carrier using removal tool (01c, 01d, 01e).

Before inserting the collar (01e) press the rear axle carrier downwards slightly using a suitable tool, if necessary

Shown on model 129

Fig 2: Pressing Rubber Mount Out Of Rear Axle Carrier Using Removal Tool

Installing rubber mount
Smear periphery of rubber mount (1a) with lubricant.
Draw in rubber mount (1a) using installation tool (01c, 01h, 01i).
Shown on model 129

Fig 3: Drawing In Rubber Mount Using Installation Tool