Removing and installing front power seat motor group (seat cushion) - AR91.29-P-1420K

MODEL 208 with CODE (241) Memory circuit for electrically adjustable left front seat with CODE (242a) Memory circuit for electrically adjustable right front seat with CODE (275a) Memory package (driver's seat, steering column, rearview mirror) 

Fig 1: Identifying Front Power Seat Motor Group (Seat Cushion) Remove/Install Components - Model 208 With Code (241)

	Removal, installation
1	Remove front seat	Disconnect electrical leads and pneumatic lines	AR91.10-P-1000K
2	Unscrew screws (4) and remove motor		*BA91.29-P-1001-01A
		Remove only defective motors
3	Expose electrical lead and disconnect corresponding connector on control module
4	Reinstall in opposite order
5	Check for proper function

SEAT ADJUSTMENT