Release guide sleeves in flexible couplings - AR41.10-P-0050-09DA

Drift for releasing the fitted sleeves in the flexible couplings

WF58.50-P-4110-01A

Propeller shaft installed 

1. 1.1 Loosen the fitted sleeves of the flexible couplings at the transmission and rear axle joint flange using the drift (shop-made tool).
   Fig 1: Loosen/Tightening The Fitted Sleeves Of The Flexible Couplings At The Transmission And Rear Axle Joint Flange Using The Drift

   

   Propeller shaft removed 

2. 1.2 Loosen the fitted sleeves of the flexible couplings at the three-arm or four-arm flange using the drift (shop-made tool).
   Fig 2: Loosen/Tightening The Fitted Sleeves Of The Flexible Couplings At The Three-Arm Or Four-Arm Flange Using The Drift