Safety precautions for new vehicles that are being put in storage - AP00.70-P-1000ZZ

MODELS all 

	New vehicles in the context of this description are vehicles for which no inspection has been carried out to date. For other vehicles, the instructions in the Specifications for Service Products apply
	In areas in which extremely high corrosive attacks can be expected from experience, the measures given here are not always sufficient even for new vehicles	Export countries In these cases, proceed in accordance with Specifications for Service products.
	Treatment of battery if vehicle taken out of service		AR54.10-P-0006EA
	Treatment of tire inflation pressure if vehicle taken out of service	For vehicles which will be stored for longer than 2 months, the tire inflation pressure should be increased to approx. 4 bar to prevent flattening of the contact surface.
	Treatment of break system if vehicle taken out of service	Warm up service brake so that adhering moisture at the brake disks and the brake pads evaporates. This prevents the brake pad from becoming stuck to the brake disks. Release parking brake. The vehicle must be secured by engaging a gear/park pawl or by using wedges.
	Treatment of fuel system if vehicle taken out of service	To protect the fuel tank from corrosion, we recommend that the vehicle fuel tank is completely filled. Then allow gasoline engines to run warm for 2-3 minutes.
	Notes on paintwork, decorative and detachable components		AH98.00-P-9019-01Z
	if necessary, corrosion protection after painting (Section D)		AP98.00-P-0641A