Removing and installing inside rearview mirror - AR68.40-P-0001KA

MODEL 208.435 /444 /445 /447 /448 /465 /470 

Fig 1: Identifying Inside Rearview Mirror - Model 208.435 /444 /445 /447 /448 /465 /470

	Removing, installing
1	Remove overhead control panel control module (N70)		AR82.20-P-1000K
2	Turn mirror base (1) approx. 45 degrees	Insert suitable tool into mirror base (1) from right
			*WH58.30-Z-1008-14A
3	Remove inside rearview mirror	The mounting plate for the inside rearview mirror is glued onto the windshield
4	Install in the reverse order

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1008-14A	Pin punch, 4 mm dia.