Mounting Celette straightening bench modular members - AR60.10-P-1050E
MODEL 202.0 /1, 208.3 /4
| Fig. item, etc. | Work instructions | ||
|---|---|---|---|
| Mounting Celette modular member sets A1, B1, C2, C3 and D on straightening bench | The modular members can be used on all Celette straightening benches approved by MB. The straightening bench is subdivided into grid fields in the longitudinal direction. The grid fields are marked on the side of the straightening bench flange with numbers (arrow) |
||
| A1, B1 | Aligning modular longitudinal members A1 and B1 | Align modular longitudinal members A1 and B1 to match the hole pattern in the front straightening bench base plate and attach with mounting screws. Connect the modular members with assembly strips (arrow) and screw down, then remove assembly strips (arrows). | |
| C1, C2, C3, D | Mounting Celette straightening bench modular members | AR60.10-P-1050-01E |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1007-06A | Reversible ratchet |
| WH58.30-Z-1026-06A | Screwdriver bit, 8 mm for hexagon socket head screws |
| WH58.30-Z-1002-11A | Double end box wrench, offset, 22 x 24 mm |
WORKSHOP EQUIPMENT
| WE58.40-Z-1001-01E | Celette straightening bench |
| WE58.40-Z-1002-01E | Celette straightening unit |
| WE58.40-Z-1007-01E | Celette module crossmember set 955.940 |
| WE58.40-Z-1008-01E | Celette additional member 955.908 |
| WE58.40-Z-1008-03A | Pneumatic ratchet |