LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1999 >> CL500 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Mixture Formation - 140 Chassis >> Testing & Repair >> Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459 >> Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459F

Removing and installing LH-SFI variable reference resistor - AR07.41-P-1459F

ENGINE 120.980 /981 

Fig 1: Identifying LH-SFI Variable Reference Resistor
G04677837Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig. item, etc. Work instructions    
IMPORTANT Cover over module box Model 129 
Remove, install
 
IMPORTANT Right cover of engine compartment Model 140 
Remove, install
 
R17/3, R17/4 LH-SFI variable reference resistor See Diagnosis Manual Engine Volume 1, Index A.
Pay attention to correction position; install new anti-tamper seal.
 
 
  SPECIAL TOOL Figure
    SPECIAL TOOL Figure
Fig 2: Identifying Anti-Tamper Seal Pliers (124 589 01 37 00)
G04677838Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 3: Identifying Embossing Set (124 589 24 63 00)
G04677839Courtesy of MERCEDES-BENZ OF NORTH AMERICA.