Operating the deployment device - AR91.60-P-0611-04A

AR91.60-P-0611-04A	Operating the deployment device
	Risk of injury.  Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag unit with expulsion area on top, do not subject to temperatures above 100°C. When working on these units, disconnect the power supply.	AS91.00-Z-0001-01A
	Risk of injury.  Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units.	Models 124, 129 up to 30.6.93, 140, 202 up to 30.6.93 Store airbag unit with expulsion area on top, do not subject to temperatures above 100°C. When working on these units, disconnect power supply and unplug the SRS test connector (X11/13).	AS91.00-Z-0001-01B
	Notes on controlled deployment of airbag, side airbag and emergency tensioning retractor units	Models 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 240, 414, 461, 463	AH91.60-P-0611-02P
	Notes on disposal of airbags and emergency tensioning retractors	All models	OS91.00-P-0001-01A

For testing arrangement, turn rotary switch of deployment device to position	Cable set plug, no. up to 6/93	Cable set plug, no. as of 7/93	Test scope	Press: Keys	Specified value: LED	Possible causes for deviation from specified value
1			Internal battery test	Press	ON	Replace any battery set for ignition device:
				Deployment device not connected	Green malfunction indicator lamp ON	2 Baby cells (2 x 1.5 V)
1	3+4	10+11	Actuation of driver side squib	Press both push-buttons	1. Before actuation ON	Trigger circuit is defective
2	1+2	1+2	Deployment of emergency tensioning retractor squib, left seat	Press both push-buttons	Deployment makes a bang	Trigger circuit is defective
	3+4	3+4	Deployment of emergency tensioning retractor squib, right seat
3	5+6	13+14	Ignition Front passenger squib	Press both push-buttons	2. After deployment ON Green malfunction indicator lamp ON	Trigger circuit is defective