Removing and installing fan shroud - AR20.40-P-6800GV
ENGINE 602.983 in MODEL 461
| Removing, installing | |||
|---|---|---|---|
| Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant. | Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks. Wear protective gloves, protective clothes, and eye protection. |
AS20.00-Z-0001-01A | |
| 1 | Remove top radiator hose (3) | ||
| 2 | Unbolt fan shroud (1) | ||
| 3 | Remove viscous fan clutch (2) | AR20.40-P-5660GV | |
| Figure | |||
| Figure | |||
| 4 | Remove fan shroud (1) | Installation : The recess in the fan shroud should be located in the metal plate at the top of the radiator. |
|
| 5 | Install in the reverse order | ||
| 6 | Inspect coolant level and leaktightness of cooling system | AP20.00-P-2011G | |
| AR20.00-P-1010HA |