Using fixing mounts and templates - AR68.20-P-2030-02K
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1011-20A | Universal profile milling machine with surface milling cutter (3 single lip miller Ø 5 x 60mm, 2 single lip miller Ø 5 x 90mm, templates, fixing supports for model 129, 170, 202, 208, 210, 463), Firma Fetzer GmbH 75446 Wiernsheim-Pinache |
Top cover
It is necessary to use the aluminum strips provided between the spacer frame FD3/202 and milling table surface in the area of the switch cutout.
Desired switch cutouts must be made with cutter dia. 5 x 90 mm included with the set.