Removing and installing headliner - AR68.30-P-4300K
MODEL 208.3
| Removal, installation | |||
|---|---|---|---|
| 1 | Remove paneling on B-pillar | AR68.30-P-4700K | |
| 2 | Remove paneling on A-pillar | AR68.30-P-4050K | |
| 3 | Remove paneling on C-pillar | AR68.30-P-4490K | |
| 4 | Remove overhead control panel | AR82.20-P-1000K | |
| 5 | Remove all side grab handles on headliner | ||
| 6 | Remove sun visors | ||
| 7 | Remove front reading lamps | ||
| 8 | Remove rear dome lamp | ||
| 9 | Put down both front seat backrests toward rear and move seats to rear | ||
| 10 | Pull off retaining clip (2) in cutout for rear dome light toward front | ||
| 11 | Unhook headliner (1) from sliding/pop-up roof frame at front, then slide headliner (1) toward front and move out at rear of sliding/pop-up roof frame | ||
| 12 | Remove headliner (1) on passenger side | ||
| 13 | Reinstall in opposite order |