Removing and installing cover on shift lever - AR68.20-P-2310F
MODEL 210 with CODE (230a) 5-speed transmission
Fig 1: Identifying Cover On Shift Lever Remove/Install Components - Model 210 With Code (230A) 5-Speed Transmission
| Removal, installation | |||
|---|---|---|---|
| 1 | Open ashtray housing | ||
| 2 | Unclip frame (1) at side top with long wedge | Figure | |
| 3 | Lift cover (2) at center | ||
| 4 | Disconnect connectors on rear of cover (2) | ||
| 5 | Remove cover (2) | ||
| 6 | To remove switch module (3) unhook switch module, lift at front and remove from cover (2) | When installing the switch module (3) hook switch module in at rear (arrows) and arrest with retainers (4) |
|
| 7 | Reinstall in opposite order |