Removing and installing RF antenna lead - AR82.62-P-8221E

MODEL 202 

Fig 1: Identifying RF Antenna Lead Remove/Install Components - Model 202

	Removal, installation
1	Remove rear seat and rear backrest		AR91.12-P-1700E
	Version up to approx. 10/93
2	Remove rear seat and left side section	With folding backrest
3	Remove left front foot mat
4	Remove left door sill molding
5	Open left wiring ducts
6	Remove RF lead	The RF lead can be cut off in the area of the center console and insulated. Route new RF lead on left along center console
7	Reinstall in opposite order
	Version as of approx. 10.93
8	Remove rear seat, left and right side sections	With folding backrest
9	Remove head restraints		AR91.16-P-1770E
10	Remove paneling on C-pillar		AR68.30-P-4490E
11	Remove rear shelf and disassemble		AR68.30-P-4580E
12	Remove right front foot mat
13	Remove right door sill molding
14	Open right wiring ducts
15	Reinstall in opposite order