Removing and installing front floor covering (right) - AR68.20-P-2070E
MODEL 202
| Removal, installation | |||
|---|---|---|---|
| 1 | Move right front seat all the way back | ||
| 2 | Pull cover (1) off of side member | ||
| 3 | Pull edge guard (2) off in lower area of A-pillar | ||
| 4 | Remove cover (3) above screw (4) | ||
| 5 | Unscrew screw (4) | ||
| 6 | Remove panelling (5) | ||
| 7 | Turn screw (6) 90° and pull out | ||
| 8 | Remove cover (7) | ||
| 9 | Lift floor covering (8) at rear and remove | ||
| 10 | Reinstall in opposite order |