Test values for number of drive pinion rotor teeth - BE35.31-P-1000-01A
Models 129, 140, 170, 202, 208, 210, with 168, 185, 198 mm dia. rear axle center assembly
Test values for rear axle center assembly
| Number | Designation | Models 129, 140, 170, 202, 208, 210 Number of drive pinion rotor teeth | |
|---|---|---|---|
| BE35.31-P-1001-01A | Ratio i | 2.64/2.65/2.68 | 36 |
| 2.73 | 35 | ||
| 2.82/2.85 | 34 | ||
| 2.87 | 33 | ||
| 3.07 | 31 | ||
| 3.27/3.29 | 29 | ||
| 3.45/3.46 | 28 | ||
| 3.54/3.58 | 27 | ||
| 3.64/3.67/3.70/3.73 | 26 | ||
| 3.91/3.92 | 24 | ||
| 4.08 | 23 | ||