Removing and installing bulb of front turn signal lamp - AR82.25-P-1202D
MODEL 129 with CODE (491) U.S. version
with combined turn signal/parking lamp
| Removing, installing | |||
| 1 | Open engine hood, raise to upright position | ||
| 2.1 | Remove windshield washer water reservoir (1) | Only required for right turn signal lamp | |
| 3 | Unclip turn signal lamp (E1e5, E2e5) and remove | ||
| 4 | Disconnect connector (2) from bulb (4) | ||
| 5 | Remove socket (3) together with bulb (4) | ||
| 6 | Remove bulb (4) from socket (3) | ||
| 7 | Install in the reverse order | ||
| 8 | Carry out operational check |