Checking clutch disk for wear when installed - AR25.10-P-0020A

MODEL 129, 140, 163, 170, 202, 208, 210 

Fig 1: Checking Clutch Disk For Wear (1 Of 2)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Checking Clutch Disk For Wear (2 Of 2)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

MODIFICATION NOTES

27.3.98

Heat shield on model 163

Work steps 1.1/2.1 new

AR25.10-P-0020A

	Removing, installing
1.1	Unscrew bolts (5) for heat shield (6) and remove heat shield (6)	Model 163
2.1	Install in reverse order	Model 163
	Checking
3	Install in reverse order	If the notch marks on the gauge which has been fully inserted remain visible, the wear limit of the clutch disk has been reached (arrow a). If the notch marks are no longer visible, the clutch disks are in order (arrow b).	Fig 3

Fig 3: Identifying Standard Gauge (115 589 07 23 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.