Function of display instruments actuated via CAN data buses - GF54.30-P-3005A
MODEL 129, 140 as of 1.6.96,
163, 168, 170,
202 as of 1.8.96,
208 up to 31.7.99,
210 as of 1.6.96 up to 30.6.99
| Display instrument | Function | ||
|---|---|---|---|
| Main odometer (A1h4) | The distance covered is determined from the 4 wheel speeds which are transmitted by the traction systems control module. | Liquid crystal display | GF54.30-P-3015A |
| Electronic speedometer (A1p8) | GF54.30-P-4000A | ||
| Function of stepper motor | GF54.30-P-3009A | ||
| Tachometer (A1p5) | The speed signal comes from the engine control module. | Function of stepper motor | GF54.30-P-3009A |
| ECT gauge (A1p1) | This display is a plateau display, i.e. the pointer stops on 95°C at temperatures between 95°C and 115°C. Temperatures in this range are still not critical. The correct temperature is only displayed again from a temperature of 116°C. This prevents the driver being disturbed by the display, for example, at high outside temperatures. The warning range starts at 116°C. The coolant temperature signal comes from the engine control module. |
Function of stepper motor | GF54.30-P-3009A |
| Gear indicator (A1p12), model 168 only with automatic transmission or automatic clutch. | The instrument cluster (A1) receives its information on the gear engaged from the gear recognition module (A61) or automatic clutch control module (N15/4) | Liquid crystal display Refer also to acoustic gear warning |
GF54.30-P-3015A GF54.30-P-3010A |
| Bus systems, overall function | GF54.00-P-0004A |