Removal and installation of the sun roof headlining - ra77001400050x(0050)

A. Steel sliding/tilting roof, B. Glass sliding/tilting roof Model 140 

1. Steel tilting/sliding roof
2. Glass tilting/sliding roof

1. Steel tilting/sliding roof 
   Fig 1: Identifying Steel Sliding Roof Components

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

   Tilting/sliding roof	open, unclip headliner with plastic wedge (Fig 1), pull out toward top and completely close tilting/sliding roof.
   Slider (Fig 1)	position horizontally and completely open tilting/sliding roof.
   Reinstall	in opposite order.

   Installation note 

   When installing insert tube into guide on head-liner (Fig 2). Move tilting/sliding roof half way up and check to ensure that side covers move in and out properly (Fig 2).

2. Glass tilting/sliding roof 
   Fig 2: Identifying Glass Sliding Roof Components

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

   Tilting/sliding roof	move to raised position.
   Tilting bracket (Fig 2)	unlock at transport bridge using screwdriver.
   Tilting/sliding roof	open fully.
   Headliner (Fig 2)	lift out.
   Reinstall	in opposite order.