Removing and installing Parktronic system warning indicators - ra54001401068x(1068)

A. Instr. panel left, B. Instr. panel center, C. Rear done lamp Model 140 

Preliminary work:

Cover for loudspeaker removed (REMOVAL AND INSTALLATION OF THE LOUDSPEAKER COVER ).

1. Warning indicator (A44/1), instrument panel, left 
   Fig 1: Identifying Warning Indicator, Air Nozzle And Screws

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

   Screws (1)	unscrew, screw in.
   Catches (arrows)	lift.
   Air nozzle (2)	remove, install.
   	NOTE: When installing the air nozzle (2) insert into air duct and allow catches (arrow) to engage audibly.
   Connector on warning indicator (A44/1)	disconnect, reconnect.
   Warning indicator (A44/1)	unclip, clip in.

2. Warning indicator (A44/4), instrument panel, center 

   Preliminary work:

   Lock cylinder for glove box removed (REMOVAL AND INSTALLATION OF THE GLOVE COMPARTMENT LOCK CYLINDER ).

   Spectacles compartment removed (REMOVAL AND INSTALLATION OF THE SPECTACLES COMPARTMENT ).

   Fig 2: Identifying Warning Indicator, Center Nozzle, Connectors, Screws And Catches For Vent Grate

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

   Screws (1)	unscrew, screw in.
   Catches for center nozzle (arrows 5)	lift.
   Center nozzle (2)	remove, install.
   	NOTE: When installing center nozzle (2) the catches (arrows 5) must engage audibly.
   Connectors (3 and 4)	disconnect, reconnect.
   Catches for vent grate (arrows 6)	lift, catch.
   	NOTE: When installing the vent grate the catches (arrows 6) must arrest audibly.
   Warning indicator (A44/4)	remove, install.

3. Warning indicator (A44/3), rear dome lamp 

Fig 3: Identifying Warning Indicator

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.