Control buttons, location/task - GF54.30-P-2004A
MODEL 129, 140 as of 1.6.96,
163, 170
The instrument cluster has two control buttons which are on the left or right next to the speedometer.
The right control button is used to adjust the time (refer to Owner's Manual).
The left control button is used
- to regulate the instrument illumination
- to activate the display illumination
- to reset the trip odometer display
- to operate the maintenance display (model 170 only bis 05.97)
- to operate the Active Service System ASSYST (as of 06.97)
| Purpose/function of terminal 58d, instrument display illumination | Engines 112, 113, 611 (engines with oil sensor) | GF54.30-P-3008A | |
| Electronic clock | GF54.30-P-3011A | ||
| Active Service System (ASSYST) | GF00.20-P-0003-01A | ||
| Operating instructions, resetting | Model 210 as of 01.03.97 with engines M111, OM 602, OM 604, OM 605 and OM 606 | GF00.20-P-0003-01B | |
| As of 06/97 models 129, 140, 170, 202 except engines 112, 113, 611 (valid for engines with oil level switch) |