Removing and installing combination relay - ra540c1401500x(1500)
C. Connector pin assignment combination relay Model 140 up to 08/95
Operation no. of operation texts and work units or standard texts and flat rates:
C. Connector pin assignment combination relay (up to 08/95)
5-pin connector (connector 2)
PIN ASSIGNMENT OF 5-PIN CONNECTOR
| No. | Designation | Cable cross-section mm2 | Color of cables |
|---|---|---|---|
| 1 | 13-pin trailer coupling socket (right turn signal) | 0.75 | black/green |
| 2 | 13-pin trailer coupling socket (left turn signal) | 0.75 | black/white |
| 3 | 13-pin trailer coupling socket (trailer recognition) | 0.75 | black/white |
| 4 | - | - | - |
| 5 | Heated rear window | 0.75 | black |
8-pin connector (connector 3)
PIN ASSIGNMENT OF 8-PIN CONNECTOR
| No. | Designation | Cable cross-section mm2 | Color of cables |
|---|---|---|---|
| 1 | ATA control module (N26) pin 16 | 0.75 | blue/yellow |
| 2 | - | - | - |
| 3 | Wiper relay (K26) connector (1) pin 2 | 0.75 | brown/yellow |
| 4 | - | - | - |
| 5 | Wiper relay (K26) connector (1) pin 3 | 0.75 | yellow |
| 6 | Wiper relay (K26) connector (1) pin 5 | 0.75 | black/violet |
| 7 | F2 maxi fuse box pin 11 | 4.0 | red/white |
| 8 | - | - | - |
21-pin connector (connector 1)
PIN ASSIGNMENT OF 21-PIN CONNECTOR
| No. | Designation | Cable cross-section mm2 | Color of cables |
|---|---|---|---|
| 1 | Connector, combination switch (S4x1) pin 6 | 0.75 | black |
| 2 | Hazard warning switch (S6) pin 1 | 0.75 | grey/white/violet |
| 3 | Main ground (behind instrument cluster, W1) | 0.75 | brown |
| 4 | Fuse box F3, fuse 17, terminal 30 connector position 22, pin 2 | 1.5 | red |
| 5 | Connector, combination switch (S4x1) pin 10 | 0.75 | black/blue/white |
| 6 | Switch, heated rear window (S14) pin 5 | 0.75 | green/black |
| 7 | Terminal block (X4/17) terminal 15C | 1.0 | black/grey/red |
| 8 | Connector, taillamp harness (X18) right turn signal lamp, pin 10 | 1.0 | black/green |
| 9 | Connector, combination switch (S4x1) pin 9 | 0.75 | black/blue/yellow |
| 10 | Hazard warning switch (S6) pin 2 | 0.75 | black/yellow/green |
| 11 | Connector, combination switch (S4x1) pin 7 | 0.75 | blue |
| 12 | Connector, taillamp harness (X18) left turn signal lamp, pin 9 | 1.0 | black/white |
| 13 | Switch, heated rear window (S14) pin 1 | 0.75 | green/blue |
| 14 | Fuse box F3, fuse 22, terminal 15C, plug location position 30 | 1.0 | black/grey |
| 15 | Fuse box F3, fuse 15, terminal 15 fused | 1.5 | black/yellow |
| 16 | - | - | - |
| 17 | Exterior lamp failure monitoring unit (N7), connector 3, pin 15 | 0.75 | black/green/white |
| 18 | Terminal block, V-signal/ABS (X46/5) | 0.75 | green/black |
| 19 | Diode matrix, engine speed increase (DZA) (V2), connector 1, pin 1 | 0.75 | violet/white |
| 20 | Terminal block (X6) terminal 58d | 0.75 | grey/blue |
| 21 | Connector, combination switch (S4x1) pin 8 | 1.0 | grey/white/green |