Removal and installation of paneling on the rear center panel - ra68001400485x(0485)

Model 140 

Fig 1: Identifying Panelling On Rear Center Panel Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Trunk lid	open.
Plug-in clips (1)	remove by pulling out dowel and removing plug-in clips (8 pieces).
Both bulb holders for tail lamps	open.
Panelling (2) on trunk lid panelling (3)	unclip (3 socket pins, arrows) then remove panelling (2).
Panelling (2)	reinstall in opposite order.