Removing and installing throttle control cable - AR30.10-P-3400E

ENGINE 119.97 

Fig 1: Identifying Throttle Control Cable Remove/Install Components - Engine 119.97

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removal, installation
1	Remove guide (30/5)	First pull plastic nipple out of guide, do not damage Installation  : Ensure that plastic nipple catches in guide
2	Unhook control cable (30) from control lever (9)
3	Press plastic clip (30/4) together and remove from fixed lever (10) together with control cable
4	Remove footwell paneling
5	Unhook control cable mount (arrow) from accelerator pedal lever (14)	Model 124  Unhook return spring (35), hook in Models 129, 140  Remove holder (37), install
6	Push control cable (30) toward exterior from passenger compartment	Do not press out rubber grommet (30/6)
7	Completely remove control cable (30) from engine compartment
8	Reinstall in opposite order
9	Lubricate control cable (30) between guide (30/5) and end element with corrosion protection grease		*BR00.45-Z-1006-06A
10	Check control, adjust	With ASR, code 471a	AR30.10-P-1010EA
		Without ASR, code 471a	AR30.10-P-1010EB

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1006-06A	Grease	A 001 989 37 51 10