Removing and installing pedal assembly - AR29.10-P-0300B
MODEL 140
| Removing, installing | |||
|---|---|---|---|
| Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid. | Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Notes on brake fluid | All models | AH42.50-P-0001-01A | |
| Notes on repairs to brake system | All models | AH42.00-P-0003-01A | |
| 1 | Remove cover below instrument panel on left | ra68001400150x | |
| 2 | Take out left floor covering | ra68001400205x | |
| 3 | Pinch off connection hose from brake fluid reservoir to master cylinder | Fig 2 | |
| 4 | Disconnect hydraulic line (17) at master cylinder (11) | ||
| 5 | Unplug cable connector from stop light switch | ||
| 6 | Unplug cable connector from clutch pedal switch | Models fitted with cruise control code 650 | |
| 7 | Remove brake master cylinder | ra42001240315x | |
| 8 | Remove ABS hydraulic unit | ra42001240705x | |
| 9 | Remove ASR hydraulic unit | ra42001400816x | |
| 10 | Remove brake booster | ra43001240350x | |
| 11 | Unscrew nuts of pedal bearing bracket | ||
| 12 | Detach pedal support (10) and take out completely to the outside | ||
| 13 | Install in the reverse order | ||
| 14 | Bleeding the clutch actuation | AR25.20-P-0070A | |
| 15 | Inspect system for leaks |