Removing and installing control module (Xenon headlamps) - ra82001404631x(4631)

Model 140 

Preliminary work:

Headlamp unit removed (82-4730).

Fig 1: Identifying Control Module (Xenon Headlamps) Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Screws (1)	unscrew, screw in.
Holder (2)	remove, install.
Control module (E1n1, E2n1)	disconnect, connect. Observe coding for control module (arrow)! Check gasket for damage, if gasket is damaged replace control module (E1n1, E2n1) NOTE: When installing ensure that the gasket is seated correctly.