Brake pedal occasionally does not release completely or high brake lining wear or rubbing noise when brake pedal is depressed - AF42.10-P-6100AG
MODEL 210.### 1# up to 31.10.96
| Damage code | Cause | Remedy | |
|---|---|---|---|
| 29 111 D6 | Possible cause: Clearance between brake pedal and crash deflector insufficient | 1 Remove brake pedal 2 Modify contour/thickness of brake pedal crash deflector (file off), see figure. Total thickness after modification a= 23 mm (was 28 mm) |