Check setting of windshield washer system spray nozzles - AP82.35-P-8252-01BA

Fig 1: Identifying Adjusting tool (110 589 02 63 00)

MODEL 124

The spray jet must hit the glass surface in the marked area.

Fig 2: Identifying Spray Jet Hit Position On Glass Surface - Model 124

MODEL 129

The spray jet should hit the glass surface in the marked area.

Fig 3: Identifying Spray Jet Hit Position On Glass Surface - Model 129

Model 140

The spray jet must hit the glass surface in the marked area.

Fig 4: Identifying Spray Jet Hit Position On Glass Surface - Model 140

Model 168, 414 shown on model 168

The spray jet should hit the glass surface in the marked area.

Fig 5: Identifying Spray Jet Hit Position On Glass Surface - Model 168, 414

MODEL 170

The spray jet must hit the glass surface in the marked area.

Fig 6: Identifying Spray Jet Hit Position On Glass Surface - Model 170

MODEL 202

The spray jet should hit the glass surface in the marked area.

Fig 7: Identifying Spray Jet Hit Position On Glass Surface - Model 202

1 Correct windshield washer system spray nozzle settings if necessary using adjusting pin.

The spray jet must hit the windshield in the marked area.

Models 208, 210, shown on model 210

Fig 8: Identifying Spray Jet Hit Position On Glass Surface - Model 208 And 210