LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1998 >> CLK320 >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Power Seats - C43, C230 & C280 >> System Tests (Heated Seats) >> Test 6: Driver's Heated Seat Elements Resistance

Test 6: Driver's Heated Seat Elements Resistance

  1. Disconnect driver's seat cushion heater element harness connector. Measure resistance between terminals No. 3 and 4 at driver's heated seat element. If vehicle has leather seats, resistance should be 3.9-4.7 ohms. If vehicle has cloth seats, resistance should be 2.5-3.0 ohms. If resistance is as specified, go to next step. If resistance is not as specified, replace driver's seat cushion heater element.
  2. Measure resistance between terminals No. 1 and 2 at driver's heated seat back element. If vehicle has leather seats, resistance should be 3.8-4.5 ohms. If vehicle has cloth seats, resistance should be 2.5-3.0 ohms. If resistance is as specified, driver's heated seat back element resistance is okay at this time. If resistance is not as specified, replace driver's seat back heater element.
scientia non olet · About LEMON Manuals