Removing and installing taillamp in fender - AR82.10-P-4910B

MODEL 208 

Model 208 

Fig 1: Identifying Taillamp In Fender Remove/Install Components

	Removal, installation
1	Fold side paneling in trunk to side
2	Unscrew nuts (6)
3	Remove taillamp unit (E3/E4) from fender together with gasket (5)	Installation:  Ensure that gasket is in good condition and seated properly
4	Disconnect electrical connector (4) from taillamp unit
5	Reinstall in opposite order
6	Check for proper function