Checking basic position of camshafts - AR05.20-P-6010HW

ENGINE 601, 602, 603, 602.983 

Fig 1: Identifying Position Of Camshafts - Engine 601, 602, 603, 602.983

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig. item etc.	Work instructions
2	Position piston of cylinder 1 to ignition TDC	Rotate engine at crankshaft. Engine must not be rotated at the camshaft or cranked backward.
3	Inspect basic position of camshaft	The marking on the camshaft (arrow) should be aligned with the marking at the 1st camshaft bearing cap (arrow). Set, if necessary, after inspecting.