Electronic power control malfunction indicator lamp position / task / design /function - GF30.20-P-4012L
ENGINE 119.980 / 981, 120.982 up to 31.5.96 in MODEL 140 up to 31.5.96
ENGINE 119.982, 120.983 up to 31.5.96 in MODEL 129 up to 31.5.96
The EPC malfunction indicator lamp is discontinued as of 06/96
| Position | In instrument cluster | ||
| Task | Indicating fault in electronic accelerator pedal (electronic accelerator emergency running) | ||
| Design/function | The malfunction indicator lamp is supplied with voltage by circuit 15. The ME-SFI control module actuates the lamp by connecting it to GND. The malfunction indicator lamp (A1e43) should come on when the ignition is switched on and go out when the engine is running. If it does not go out, there is a fault at the electronic accelerator pedal. The system is in the emergency running mode (read HHT fault memory). |