Removing and installing inner backrest fitting - AR91.12-P-1733A

MODEL 202.07/08/18 

Fig 1: Identifying Inner Backrest Fitting Remove/Install Components - Model 202.07/08/18

	Removal, installation
1	Remove rear backrest		AR91.12-P-1700EA
2	Unscrew cover (1)
3	Separate pull cable (2) at adjustment nut and counter-nut	Installation:  Arrest release lever in locked position. Screw union nut onto thread on pull cable until pull cable is tensioned slightly. Then turn union nut back 1 to 2 turns and secure with counter nut in this position.
4	Unscrew backrest fitting (3)
5	Reinstall in opposite order