LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1998 >> C43 >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Power Mirror/Steering Column Adjustment Systems - C230, C280, CLK320, CLK 430, E300, E320 & E430) >> System Tests >> Test 3: Driver's Side Mirror Potentiometer Resistance

Test 3: Driver's Side Mirror Potentiometer Resistance

WARNING: This page does not describe the selected car, but rather 56 other vehicles, including the 1999 Mercedes-Benz CLK430, 1999 Mercedes-Benz CLK320, 1998 Mercedes-Benz E430, 1998 Mercedes-Benz E320, and 1998 Mercedes-Benz E300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect driver's side mirror harness connector No. 2. Measure resistance between terminals No. 1 and 4 at driver's side mirror. When mirror is moved manually, resistance should be 700-1500 ohms. If resistance is as specified, go to next step. If resistance is not as specified, replace driver's side mirror assembly.
  2. Measure resistance between terminals No. 2 and 4 at driver's side mirror. When mirror is moved manually, resistance should be 300-1300 ohms. If resistance is as specified, driver's side mirror potentiometer resistance is okay at this time. If resistance is not as specified, replace driver's side mirror assembly.
scientia non olet · About LEMON Manuals