Removing and installing paneling on A-pillar - AR68.30-P-4050F

MODEL 210 

Fig 1: Identifying Paneling A-Pillar, Headlining And Retaining Clips - Model 210

	Removal, installation
1	Pull off edge guard in area of A-pillar paneling
2	Remove handle
3	Press paneling (1) off of retaining clips (3) with installation wedge		Fig 2
4	Pull paneling (1) inward at center, pull out of B-pillar paneling and remove	Paneling (1) is arrested on dashboard with retaining lugs
5	Reinstall in opposite order

Fig 2: Installation Wedge (110 589 03 59 00)