Removing and installing lining on C-pillar - AR68.30-P-4490EA

MODEL 202.07/08/18 

Fig 1: Identifying Lining On C-Pillar Remove/Install Components (Model 202.07/08/18)

	Removal, installation
1	Pull off cover (1)
2	Unscrew bolt for upper guide fitting (2)		*BA91.40-P-1005-01A
			Fig 2
3	Unclip lining (3) toward center of vehicle
4	Reinstall in opposite order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 202, 208.3	Model 208.4	Model 210
BA91.40-P-1005-01A	Bolt in rear upper belt guide fitting	Nm	30	30	30

Fig 2: Identifying Torque Wrench (001 589 66 21 00)