Remove/install glove compartment - AR68.10-P-1400E
MODEL 202, 463.200 /204 /206 /207 /208 /209 /220 /221 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /300 /304 /307 /308 /320 /321 /324 /325 /327 /328 /330 /331
Model 202
Model 463
| Remove, Install | |||
|---|---|---|---|
| 1 | Open/close glove compartment lid (1) | ||
| 2 | Unclip/clip on housing (2) for glove compartment lamp and disconnect/connect connector | ||
| 3 | Remove expanding anchors (3, 4 each) on glove compartment (4) | ||
| 4 | Unclip glove compartment (4) with long wedge at top and bottom and pull out | Figure | |
| 5 | Install in the reverse order |
Special tool