Wind noise at doors - AF94.10-P-1100DG

MODEL 140 

Damage code	Cause	Remedy:
72 001 39	Cause 1:	Remedy 1:
	Door sealing frame fit not always optimal.	1 Remove/install/replace door sealing frame.
		Front doors	ra72001400221x
		Rear doors	ra72001400220x
		Install improved door sealing frame as of index 24. The index is located on the rubber element on the front doors in the area of the outside mirrors; on the rear doors at the top in the area of the B pillar.
72 001 39	Cause 2:	Remedy 2:
	Initial tension on door sealing frame to B pillar too low.	1 Adjust distance between rear door sealing frame and B pillar. This adjustment should be accomplished only with the door hinges.
		2 Adjust front door to rear door.

Fig 1: Identifying Distance Between Rear Door Frame And Pillar (1 Of 2)

Fig 2: Identifying Distance Between Rear Door Frame And Pillar (2 Of 2)

TEST AND ADJUSTMENT VALUES

Number	Designation		Model
			140
	Distance between rear door frame and B pillar	A mm	100
		B mm	60
		C mm	27.5 -1