Using fixing mounts and templates - AR68.20-P-2030-02ED
Commercially available tools
| Number | Designation |
|---|---|
| WH58.30-Z-1011-20A | Universal profile milling machine with surface milling cutter (3 single lip miller ø 5x60mm, 2 single lip miller ø 5x90mm, templates, fixing supports for model 129, 170, 202, 208, 210, 463), Firma Fetzer GmbH 75446 Wiernsheim-Pinache |
Top cover
Fasten cover on mount with tape.
It is necessary to use the aluminum strips provided between the cover and upper section of the milling table in the area of the switch cutout.