Removing and installing daytime running lamp control module - AR82.10-P-2313A
MODEL 202 with CODE (236a) special light circuit - daytime running lamp
N35 Daytime running lamp control module
| Removal, installation | |||
| Modified circuit of daytime running lamp | Model 202 (code 236a) | BT82.10-P-9401-01A | |
| 1 | Disconnect ground cable at the battery | AR54.10-P-0003A | |
| 2 | Remove trim below instrument panel (Driver's Side ) | AR68.10-P-1500E | |
| 3 | Remove daytime running lamp control module (N35) | ||
| 4 | Install in the reverse order |