Removing and installing center console - AR68.20-P-2000K
MODEL 208
| Removal, installation | |||
|---|---|---|---|
| 1 | Remove cover below instrument panel (left) | AR68.10-P-1500K | |
| 2 | Remove cover below instrument panel (right) | AR68.10-P-1520K | |
| 3 | Remove cover on air outlet in footwell on left and right | ||
| 4 | Remove ashtray housing | AR68.20-P-2400K | |
| 5 | Remove spectacles compartment or cassette compartment | AR68.20-P-2450K | |
| 6 | Remove radio | AR82.60-P-7502EA | |
| 7 | Remove push-button control module for heater/ air-conditioning | ||
| 8 | Open cover (2) above stowage compartment and remove insert | ||
| 9 | Unscrew screws (3) in stowage compartment | ||
| 10 | Unscrew screws (4) in area of shift lever dome | ||
| 11 | Unscrew screws (5) below center nozzle | ||
| 12 | Unscrew screws (6) in bottom section of instrument panel on left and right | ||
| 13 | Lift floor covering in front in area of center console paneling | ||
| 14 | Adjust both front seats to rear | ||
| 15 | Remove center console (1) toward rear by lifting side covers over air outlet ducts and seat adjustment rails, then pull center console (1) below bottom sections of instrument panel | ||
| 16 | Reinstall in opposite order |