Installing upper bracket for jacket tube - AR46.10-P-0600-01B

TEST VALUES - JACKET TUBE

Number	Designation		Model 129	Model 140	Model 210
BE46.10-P-1003-03A	Dimension "b" on upper bracket on jacket tube	mm	30+0.5	30+0.5	30+0.5
BE46.10-P-1003-03A	Dimension "b" on upper bracket on jacket tube	Refer to illustration	AR46.10-P-0600-01B	AR46.10-P-0600-01B	AR46.10-P-0600-01B

TORQUE SPECIFICATION

JACKET TUBE

Number	Designation		Model 129	Model 140
BA46.10-P-1006-03A	Clamping screw of upper bracket on jacket tube	Nm	5	5

TORQUE SPECIFICATION

JACKET TUBE

Number	Designation		Model 210
BA46.10-P-1015-03D	Clamping screw of upper bracket on jacket tube	Nm	5

Installing

Install bracket (85) at an angle of 90° to jacket tube unit as shown.
Adjust dimension "b" between bracket (85) and locking ring (70h).

Dimension "b" is determinate for the satisfactory function of the fanfare horns and airbag clock spring contact.
Tighten bolt (85a).

Fig 1: Identifying Dimension Between Bracket And Locking Ring

Fig 2: Identifying Bracket-To-Jacket Tube Unit Angle