Removing and installing push-button control module for automatic heater or air conditioning (tempmatic) - AR83.25-P-1120E
MODEL 202 up to 31.8.95 except CODE (305a) Dust filter
Fig 1: Identifying Heater Push-button Control Module Without Dust Filter And Blower Switch - Model 202 Up To 31.8.95 Except Code (305a)
| Removal, installation | |||
| 1 | Remove radio | AR82.60-P-7502EA | |
| 2 | Pull off control knobs (1 and 2) | ||
| 3 | Unscrew hex. nut (4) | ||
| 4 | Unscrew screws (5) | ||
| 5 | Remove cover (3) | ||
| 6 | Unscrew screws (6) | ||
| 7 | Pull out heater push-button control module (N18) | ||
| 8 | Disconnect connector between heater push-button control module (N18) and blower switch (S3) | ||
| 9 | Remove blower switch (S3) | ||
| 10 | Pull out blower switch (S3) | ||
| 11 | Reinstall in opposite order |