Removing, installing electric fan - AR20.40-P-5000B

ENGINE 611.960 in MODEL 202.133 /134 /193 /194 

ENGINE 611.961 in MODEL 210.006 /007 /206 /606 

ENGINE 612.961 in MODEL 210.016 /216 /616 

Shown on model 202: 

Fig 1: Identifying Electric Fan Removal/Install Components - Shown On Model 202

	Removing, installing
1	Disconnect ground cable of the battery		AR54.10-P-0003A
2	Detach coolant return flow hose (3) from fixture at radiator (1)	Attach to engine
3	Take off electrical plug connection at electric fan (2)
4.1	Disconnect boost pressure regulator vacuum transducer (Y31/5) and EGR pressure regulator flap (Y31/4) at electric fan	Model 202
		Place components to the side and attach at that point
5	Pull off flat springs (4) on top of electric fan
6	Lift electric fan (2) up and out	Installation:  insert retaining lugs (arrows) of electric fan into the mounts on the radiator.
7	Install in the reverse order