Measuring rear axle carrier (when removed) - AR40.30-P-0410A

MODELS 129, 170, 202, 208, 210

Fig 1: Measuring Rear Axle Carrier - Models 129, 170, 202, 208, 210

	Remove/Install
1	Remove/install rear axle	Model 129	AR35.10-P-0010C
		Models 170, 202, 208	AR35.10-P-0010D
		Model 210	AR35.10-P-0010B
2	Remove/install rubber mount of rear axle suspension	Models 129, 170, 202, 208 front rubber mount	AR35.10-P-0040-02D
		Model 129 rear rubber mount	AR35.10-P-0040-03E
		Models 170, 202, 208 rear rubber mount	AR35.10-P-0040-03D
		Model 210 front rubber mount	AR35.10-P-0040-02C
		Model 210 rear rubber mounts	AR35.10-P-0040-03C
	Measure
3	Set up Celette straightening bench modular members	Refer to Body Plan - Celette straightening bench
4	Install and secure checking fixtures (048a, 048b) in the supports of the Celette straightening bench	Checking fixtures, models 129, 170, 202, 208	Fig 2
		Checking fixtures, model 210	Fig 8
5	Place rear axle carrier complete (with axle halves) or as an individual part on the checking fixtures (048a, 048b) and fix to the upper parts of the checking fixtures (048c)		*BE40.30-P-1001-07A
6	Measure dimension "L1-L3"	Insert checking pin (049) into appropriate reference bores and secure with bolts. Do not tighten checking pin so that the centering holes can be aligned when measuring. Insert checking pin (L=58 mm) into the fixtures of the spring link, insert checking pin (L=38 mm) into the fixtures of the camber struts, thrust arms	*BE40.30-P-1001-04A
		Gauge pins	Fig 3
		Telescopic measuring rod	Figure
		Telescopic measuring rod	Figure

TEST VALUES FOR REAR AXLE CARRIER SPRING LINK, CAMBER STRUT/THRUST ARM

Number	Designation			Model 129	Model 202	Model 210
BE40.30-P-1001-04A	Dim.	Camber strut "L1"	mm	796±2	748±2	804±2
		Spring link "L2"	mm	510±2	462±2	522±2
		Thrust arm "L3"	mm	1082,4±2	1034,3±2	1094,4±2
		Fig. see		AR40.30-P-0410A	AR40.30-P-0410A	AR40.30-P-0410A

TEST VALUES FOR REAR AXLE CARRIER SPRING LINK, CAMBER STRUT/THRUST ARM

Number	Designation			Model 170	Model 208
BE40.30-P-1001-04A	Dim.	Camber strut "L1"	mm	748±2	748±2
		Spring link "L2"	mm	462±2	462±2
		Thrust arm "L3"	mm	1034,3±2	1034,3±2
		Fig. see		AR40.30-P-0410A	AR40.30-P-0410A

TEST VALUES FOR REAR AXLE CARRIER

Number	Designation		Model 129	Model 140	Model 170	Model 202	Model 208
BE40.30-P-1001-07A	Distance between rear axle carrier holder casing and checking fixture	mm	≤ 5	≤ 5	≤ 5	≤ 5	≤ 5

TEST VALUES FOR REAR AXLE CARRIER

Number	Designation		Model 210
BE40.30-P-1001-07A	Distance between rear axle carrier holder casing and checking fixture	mm	≤ 5

Fig 2: Identifying Supports (202 589 00 23 00)

Fig 3: Identifying Gauge Pin (124 589 21 21 00)

Fig 4: Identifying Telescopic Measuring Rod (124 589 01 19 00)

Fig 5: Identifying Telescopic Measuring Rod (124 589 02 19 00)

Fig 6: Identifying Connecting Pieces (124 589 08 63 00)

Fig 7: Identifying Extraction And Installation Tool (210 589 01 43 00)

Fig 8: Identifying Fixtures - 4 Each (210 589 16 23 00)