Supporting lower wishbone and removing and installing on frame floor Fixing modified - AR33.10-P-0200-01B
Replace self-locking nuts
Lower wishbone bearing bracket
| Number | Designation | Model 202 | Model 170 | Model 208 | |
|---|---|---|---|---|---|
| BA33.20-P-1009-01A | Self-locking nut of lower wishbone on frame | Nm | 120 | 120 | 120 |
Detaching:
- Support wishbone.
- Unscrew nuts (19b, 20b), remove bolts (19, 20).
Attaching:
Observe technical modification on vehicles up to 08/93
- Install bolts in lower wishbone from the front towards the back.
- Tighten new nuts until they just abut.
Only tighten nuts (19b, 20b) when the vehicle is on its wheels in the ready-to-drive condition.