Removing and installing inner door actuation on rear door - AR72.12-P-2310E
MODEL 202
| Removal, installation | |||
| 1 | Remove window crank | AR72.10-P-1100GV | |
| 2 | Remove door liner on rear door | AR72.12-P-1010E | |
| 3 | Pull off foil in upper area of inner door panel | ||
| 4 | Unclip linkage (2) at clip (3) and detach from rear door lock | ||
| 5 | Unscrew Phillips screw (6), remove guide lever (7) | ||
| 6 | Unclip locking linkage (4) at clip (5) and press off of rear door lock | ||
| 7 | Install in reverse order |