Removing, disassembling, assembling and installing radiator shell - AR88.40-P-4000E

MODEL 202 

Fig 1: Identifying Radiator Shell Remove/Install Components - Model 202

	Removal
1	Open engine hood		AR88.40-P-1000E
2	Unscrew screws (2) on inside of radiator shell (1) and simultaneously remove seal (3)
3	Remove radiator shell toward front	Avoid damaging paint
4	Put radiator shell down on suitable surface	Avoid damaging chrome on shell and trim strips
	Disassembly
5	Push off combination clips (8 + 9)
6	Unscrew screw (5)
7	Remove radiator grille (4) from chrome frame
8	Pull out trim strips (6) on radiator grille (4)
	Assembly
9	Install trim strips (6) on radiator grille (4)
10	Install radiator grille (4) in chrome frame	Avoid damaging trim strips
11	Screw in screw (5)
12	Install combination clips (8 + 9)
	Installation
13	Check insert (7) on chrome frame for damage and proper seat	Replace insert if damaged Insert is self-adhesive
14	Install radiator shell (1) from front	Avoid damaging paint
15	Screw in screws (2) while installing seal (3) simultaneously	When installing the radiator shell ensure that the engine hood is positioned correctly
16	Close engine hood		AR88.40-P-1000E